Menu
Architectural / Custom Installation
About Us
Support
$1,600.00 / Each
Raising the Bar For Multi-Channel Audio
The Bison Center is a center channel speaker made entirely in Canada. It provides tremendous articulation, rhythm, and dynamics that bring lifelike vibrancy to multi-channel audio systems. Its convenient dimensions allow it to fit into just about any AV furniture. It can also be comfortably perched atop a console cabinet or table in rooms where the TV is installed on the wall.
The Bison Center is designed to project a gigantic soundstage that balances micro nuances, truthful voicing and a commanding presence. And since it shares the same DNA as the other Bison series speakers, it also offers an immersive musical dimensionality and incredible extension.
Enhance your multi-channel experience forever.
| Design: | Ported 2-Way Center Speaker |
| Tweeter: | 1.3 in /33 mm Laser Etched Textile Soft Dome |
| Woofer: | 5.25 in / 133.35 mm Copper Clad Voice Coil |
| Impedance: | 6 Ohm |
| Sensitivity: | 90 db |
| Frequency Response: | 42 Hz to 21kHz ± 3 dB |
| Recommended Power: | 30-150W |
| Crossover Frequency: | 2.5 kHz (first order) |
| Speaker Terminals: | 4 way Bi-Wire-able |
| Break in Time: | 70-100 hours |
| Dimensions | |
| Width: | 575mm / 22.638in |
| Height: | 160mm / 6.299in |
| Depth: | 230mm / 9.055in and 240mm / 9.448in (with Grill Installed) |
| Weight: | 23.40lb / 10.61kg |
Artisanal Cabinet Construction
The cabinet design features a lock-mitered, monocoque cabinetry with full cross bracing. Lock mitering produces a cabinet 4 times as rigid as V groove assembly and provides a substantially larger contact point for gluing. Expansion and contraction can occur over many decades without any sonic degradation.
Custom Woofers
The Bison series features custom woofers that are unique to Totem with the integration of critical proprietary elements and magnetics. These woofers are thoroughly engineered by Totem and then manufactured to the strictest standards to meet our especially unique parameters by the finest raw driver suppliers in the world.
Tweeters
The Bison series employs a brand new, custom-designed 1.3-inch laser etched textile soft dome tweeter that is neodymium magnet activated. This tweeter extends up to 30kHz and plays low enough to contribute to the midrange band, creating a seamless and captivating interplay.
Rear Ported Design
The double or single rear ports use the energy generated by the movement of the woofer to not only enhance the bass response of the Bison series but fine tune this bass response to be in perfect phase anywhere one listens to them in a room. These ports are carefully tuned in conjunction with the cabinet size, volume, and an internal critical labyrinth design to eliminate smearing at lower frequencies.
Connectors
Two sets of high conductivity gold plated connectors efficiently capture the incoming signal for superior speaker performance and allow traditional, bi-wire, or even bi-amplification options. They accommodate a variety of connection options such as bare wire, banana plugs, and spades.
Artisanal Cabinet Construction
The cabinet design features a lock-mitered, monocoque cabinetry with full cross bracing. Lock mitering produces a cabinet 4 times as rigid as V groove assembly and provides a substantially larger contact point for gluing. Expansion and contraction can occur over many decades without any sonic degradation.
Custom Woofers
The Bison series features custom woofers that are unique to Totem with the integration of critical proprietary elements and magnetics. These woofers are thoroughly engineered by Totem and then manufactured to the strictest standards to meet our especially unique parameters by the finest raw driver suppliers in the world.
Tweeters
The Bison series employs a brand new, custom-designed 1.3-inch laser etched textile soft dome tweeter that is neodymium magnet activated. This tweeter extends up to 30kHz and plays low enough to contribute to the midrange band, creating a seamless and captivating interplay.
Rear Ported Design
The double or single rear ports use the energy generated by the movement of the woofer to not only enhance the bass response of the Bison series but fine tune this bass response to be in perfect phase anywhere one listens to them in a room. These ports are carefully tuned in conjunction with the cabinet size, volume, and an internal critical labyrinth design to eliminate smearing at lower frequencies.
Connectors
Two sets of high conductivity gold plated connectors efficiently capture the incoming signal for superior speaker performance and allow traditional, bi-wire, or even bi-amplification options. They accommodate a variety of connection options such as bare wire, banana plugs, and spades.
Every single driver is completely unique to Totem and proprietary in design, engineered by Totem and then manufactured to the strictest standards to meet our parameters by the finest raw driver suppliers in the world. In some cases, where the technology is beyond the capabilities of suppliers or is wished to be kept secret, Totem can and will build our own drivers. Every driver exhibits phase linearity, speed, emotion, off axis natural presentation, and spatial articulation.
Totem crossovers don’t require many parts because of the synergy between our customized drivers, but the components are the world’s best. Our crossovers aren’t built on PCB’s because the laminated conductive tracks are weak and inconsistent. Instead they are secured to a thin piece of fiberboard or insulated polymers and components are mechanically crimped together because it simply sounds better. When we must solder, we choose WBT Silver Solder, the purest in the industry.
Meticulously hand crafted for peak performance that lasts decades. Lock-Miter assembly is an intricate woodworking procedure where edges physically interlock together. The resulting cabinet is up to 5 times stronger than conventional V Groove cabinets. Internal and external veneering resists warping, structurally fortifies, and ensures consistent peak performance. Industry unique Borosilicate damping manages dissipation, keeps the cabinet musically alive, and never deteriorates. Popular materials like poly fillers eventually decay, dramatically affecting the performance. Variable Density Fiberboard is denser at the extremities than the interior to reduce repetitive nodes and resonances.
Two sets of high conductivity gold plated connectors efficiently capture the incoming signal for superior speaker performance and allow traditional, bi-wire, or even bi-amplification options. They accommodate a variety of connection options such as bare wire, banana plugs, and spades.
Get the latest info on new products, events, contests and more!
