|Break-in Time:||200 - 250 hours|
|Placement from rear wall:||3' - 7' / 91.44 - 213.36 cm|
|Placement distance apart:||6' - 14' / 182.88 - 426.72 cm|
|Frequency Response:||24 Hz - 21 kHz ± 3 dB (in room)|
|Recommended Power:||80 - 250 W|
|Crossover Frequency:||Woofer to mids, 2nd order / 2nd order
Mids to tweeter, 2nd order / 2nd order
8.5" / 21.59 cm cast frame, specially damped.
High power handling.
Long throw characteristics.
3" / 7.62 cm voice coil. Cast frame. High power handling.
Wrap-around neodymium magnet structure.
Accurate linear throw.
1" / 2.54 cm alloy dome flexible linear suspension.
Special low resonance tweeter with chamber.
|Max SPL's:||In average room (12' x 20' / 4 x 6 m)
114 dB peak from pair at 7' / 2 m
|Dimensions (w x h x d):||10.7" x 44.3" x 14" / 27.18 x 112.522 x 35.56 cm (over max. size)|
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.