Click to view finish
Satin Finishes
Veneer Finishes


Break-in Time: 70 - 100 hours
Placement from rear wall 1' - 3' / 30.48 - 91.44 cm
Placement distance apart 4' - 8' / 121.92 - 243.84 cm
Frequency Response 42 Hz - 20 kHz ± 3 dB
Impedance 4 ohms minimal
Sensitivity 87.5 dB/W/m. Maximum sound pressure before dynamic compression
Recommended Power 30 - 100 W
Crossover Frequency 2.3 kHz, 2nd order
Woofer 5.5" / 13.97 cm
Tweeter 1" / 2.54 cm aluminum dome, chambered
Dimensions (w x h x d) 6.8" x 14" x 9.1" / 17.27 x 35.56 x 23.11 cm
Internal Volume 9 l (internal)
Weight approx. 12 lb / 5.8 kg

The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.

It is only through the support of advocates such as yourself that true sound can be promoted...

Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.