|Break-in Time:||60 - 80 hours|
|Placement from rear wall:||1' - 6' / 30.48 - 182.88 cm|
|Placement distance apart:||3' - 8' / 91.44 - 243.84 cm|
|Mass Loading:||2 - 10 lb / 0.9 - 4.5 kg in each cabinet|
|Frequency Response:||<32 Hz - 21 kHz ± 3 dB (with proper room positioning)|
|Recommended Power:||30 - 120 W|
|Crossover Frequency:||2.5 kHz, 1st order compensated|
ø 5.5" / 14 cm
Special extreme long throw.
Non-resonant cone and dust cap.
Dynamic linear suspension for maximum airflow.
Patented magnet system.
|Tweeter:||1" / 2.54 cm alloy dome
Flexible linear suspension
Special low resonance chambered unit
|Max SPL's:||In average room (12' x 20' / 4 x 6 m)
107 dB peak from pair at 7' / 2 m
|Dimensions (w x h x d):||6.8" x 34.3" x 9.6" / 17.272 x 87.376 x 24.384 cm|
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.