Model-1 Signature
| Break in time |
150 - 200 hours |
| Placement from rear wall |
1' - 4' / 305 - 1,219 mm |
| Placement distance apart |
3' - 7' / 914 - 2,134 mm no toe-in, 12' / 3,658 mm with toe-in |
| Frequency Response |
<50 Hz - 20 kHz ± 3 dB |
| Impedance |
4 ohms |
| Sensitivity |
87 dB/W |
| Recommended Power |
15 - 120 W |
| Crossover frequency |
2.7 kHz electrical and mechanical |
| Woofer |
5.5" / 140 mm, 3" / 76 mm voice coil |
| Tweeter |
1" / 25 mm aluminum dome, chambered |
| Dimensions (w x h x d) |
6.5 x 12.2 x 8.9" /
165 x 310 x 225 mm |
| Internal volume |
7.2 l (internal) |
| Weight |
4.1 kg (approx. 9 lb) |
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.
It is only through the support of advocates such as yourself that true sound can be promoted...
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.
