Totem Acoustic

Click to view finish

Mani-2 Signature

Break in time 200 - 300 hours
Placement from rear wall 1' - 6' / 305 - 1,829 mm
Placement distance apart 4' - 10' / 1,219 - 3,048 mm
Frequency Response 29 Hz - 20 kHz ± 3 dB
Impedance 4 ohms mainly resistive
Sensitivity 85 dB/W/m. Maximum sound pressure 110 dB before dynamic compression
Recommended Power 40 - 200 W
Crossover frequency 4 kHz electrical and mechanical
Woofer 2 x 6.5" / 165 mm, 3" /
76 mm voice coil
Tweeter 1" / 25 mm aluminum dome, chambered
Dimensions (w x h x d) 8.5 x 16.4 x 12" /
215 x 417 x 305 mm
Internal volume 15 l (internal)
Weight 10.5 kg / 23 lb
Recommended stand Totem T4L

The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.

It is only through the support of advocates such as yourself that true sound can be promoted...

Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.